Wooden Ship wheel

Ship's wheel

A ship's wheel is used to change its course. Together with the rest of the steering mechanism it forms part of the helm. It is typically connected to a mechanical, electric servo, or hydraulic system. In some modern ships the wheel is replaced with a simple toggle that remotely controls an electro-mechanical or electro-hydraulic drive for the rudder, with a rudder position indicator presenting feedback to the helmsman.

Helmsmen on older ships used a tiller (a horizontal bar fitted directly to the top of the rudder post) or a whipstaff (a vertical stick acting on a tiller).

Early ships' wheels (c. 1700) were operated to correspond to the motion                                          of The design of ships' wheels probably influenced that of the modern steering wheel.

the tiller, with a clockwise motion (corresponding to a right tiller motion) turning the rudder and thus the ship to the left. Eventually the control direction of the wheel was reversed to make it more consistent with the action of a motor vehicle's steering wheel.

A traditional ship's wheel is composed of eight cylindrical wooden spokes (though sometimes as few as six or as many as ten) shaped like balustersand all joined at a central wooden hub or nave (sometimes covered with a brass nave plate) which housed the axle. The square hole at the centre of the hub through which the axle ran is called a drive square and was often lined with a brass plate (and therefore called a brass boss, though this term was used more often to refer to a brass hub and nave plate) which was frequently etched with the name of the wheel's manufacturer. The outer rim is composed of four sections each made up of stacks of three felloes, the facing felloe, the middle felloe, and the after felloe. Because each group of three felloes at one time made up a quarter of the distance around the rim, the entire outer wooden wheel was sometimes called the quadrant. Each spoke ran through the middle felloe creating a series of handles on the outside of the wheel's rim. One of these handles/ spokes was frequently given extra grooves at its tip which could be felt by a helmsman steering in the dark and used by him to determine the exact position of the rudder—this was theking spoke and when it pointed straight upward the rudder was dead straight. The wood used in construction of this type of wheel was most often eitherteak or mahogany.

The steering gear of earlier ships sometimes consisted of a double wheel where each wheel was connected to the other with a wooden spindle that ran through a barrel or drum. The spindle was held up by two pedestals that rested on a wooden platform, often no more than a grate. A tiller rope or chain (sometimes called a steering rope or chain) ran around the barrel in five or six loops and then down through two tiller rope slots at the top of the platform before connecting to two sheaves just below deck (one on either side of the ship's wheel) and thence out to a pair of pulleys before coming back together at the tiller and therefore the ships rudder. Movement of the wheels (which were connected and moved simultaneously) caused the tiller rope to wind in one of two directions and shifted the tiller left or right. In a typical and intuitive arrangement, a helmsman turning the wheel counterclockwise would cause the tiller to move to starboard and therefore the rudder to swing to port causing the vessel to also turn to port.

Sextant history & use - Nautical sextant manufacturer

Sextant

Nautical Sextant Manufacturer

Nautical sextant manufacturer

A sextant is an instrument used to measure the angle between any two visible objects. Its primary use is to determine the angle between a celestial object and the horizon which is known as the object's altitude. Using this measurement is known as sighting the object, shooting the object, or taking a sight and it is an essential part of celestial navigation. The angle, and the time when it was measured, can be used to calculate a position line on a nautical or aeronautical chart. Common uses of the sextant include sighting the sun at solar noon and sighting Polaris at night (in the Northern Hemisphere), to find one's latitude. Sighting the height of a landmark can give a measure of distance off and, held horizontally, a sextant can measure angles between objects for a position ^[1] A sextant can also be used to measure the lunar distance between the moon and another celestial object (e.g., star, planet) in order to determine Greenwich time which is important because it can then be used to determine the longitude on a chart.The scale of a sextant has a length of ⅙ of a turn (60°); hence the sextant's name (sextāns, -antis is the Latin word for "one sixth"). An octant is a similar device with a shorter scale (⅛ turn, or 45°), where as a quintant (⅕ turn, or 72°) and a quadrant (¼ turn, or 90°) have longer scales.

Sir Isaac Newton (1643–1727) invented the principle of the doubly reflecting navigation instrument (a reflecting quadrant—see Octant (instrument)), but never published it. Two men independently developed the octant around 1730: John Hadley (1682–1744), an English mathematician, and Thomas Godfrey (1704–1749), a glazier in Philadelphia. John Bird made the first sextant in 1757. The octant and later the sextant, replaced the Davis quadrantas the main instrument for navigation.

Advantages

Nautical sextant manufacturer

Like the Davis quadrant (also called backstaff), the sextant allows celestial objects to be measured relative to the horizon, rather than relative to the instrument. This allows excellent precision. However, unlike the backstaff, the sextant allows direct observations of stars. This permits the use of the sextant at night when a backstaff is difficult to use. For solar observations, filters allow direct observation of the sun.

Since the measurement is relative to the horizon, the measuring pointer is a beam of light that reaches to the horizon. The measurement is thus limited by the angular accuracy of the instrument and not the sine error of the

length of an alidade, as it is in a mariner's astrolabe or similar older instrument.

A sextant does not require a completely steady aim, because it measures a relative angle. For example, when a sextant is used on a moving ship, the image of both horizon and celestial object will move around in the field of view. However, the relative position of the two images will remain steady, and as long as the user can determine when the celestial object touches the horizon the accuracy of the measurement will remain high compared to the magnitude of the movement.

Nautical sextant manufacturer

The sextant is not dependent upon electricity (unlike many forms of modern navigation) or anything human-controlled (like GPS satellites). For these reasons, it is considered an eminently practical back-up navigation tool for ships.

Live action role-playing game - LARP

Medieval Knight Crusader Helmet

A live action role-playing game (LARP) is a form of role-playing game where the participants physically act out their characters' actions. The players pursue goals within a fictional setting represented by the real world while interacting with each other in character. The outcome of player actions may be mediated by game rules or determined by consensus among players. Event arrangers called gamemasters decide the setting and rules to be used and facilitate play.

The first LARPs were run in the late 1970s, inspired by tabletop role-playing games and genre fiction. The activity spread internationally during the 1980s and has diversified into a wide variety of styles. Play may be very game-like or may be more concerned with dramatic or artistic expression. Events can also be designed to achieve educational or political goals. The fictional genres used vary greatly, from realistic modern or historical settings to fantastic or futuristic eras. Production values are sometimes minimal, but can involve elaborate venues and costumes. LARPs range in size from small private events lasting a few hours to large public events with thousands of players lasting for days.

Full Body Gothic armor

Terminology

LARP has also been referred to as live role-playing (LRP), interactive literature, and free form role-playing. Some of these terms are still in common use; however, LARP has become the most commonly accepted term.^[1] It is sometimes written in lowercase, as larp.^[2] The live action in LARP is analogous to the term live action used in film and video to differentiate works with human actors from animation. Playing a LARP is often calledlarping, and one who does it is a larper.

History

Gothic Gauntlets 15Th Century

LARP does not have a single point of origin, but was invented independently by groups in North America, Europe, and Australia.^[20] These groups shared an experience with genre fiction or tabletop role-playing games, and a desire to physically experience such settings. In addition to tabletop role-playing, LARP is rooted in childhood games of make believe, play fighting, costume parties, roleplay simulations, Commedia dell'arte, improvisational theatre, psychodrama, military simulations, and historical reenactment groups such as the Society for Creative Anachronism.

The earliest recorded LARP group is Dagorhir, which was founded in 1977 in the USA and focuses on fantasy battles.^[22] Soon after the release of the movie Logan's Run in 1976, rudimentary live role-playing games based on the movie were run at US science fiction conventions.^[23] In 1981, theInternational Fantasy Gaming Society (IFGS) started, with rules influenced by Dungeons & Dragons.^[24] IFGS was named after a fictional group in the 1981 novel Dream Park, which described futuristic LARPs.^[25] In 1982, the Society for Interactive Literature, a predecessor of the Live Action Roleplayers Association (LARPA), formed as the first recorded theatre-style LARP group in the US.^[26]

Treasure Trap, formed in 1982 at Peckforton Castle, was the first recorded LARP game in the UK and influenced the fantasy LARPs that followed there.^[27][28] The first recorded LARP in Australia was run in 1983, using the science fiction Traveller setting.^[29] In 1993, White Wolf Publishing releasedMind's Eye Theatre, which is still played internationally and is probably the most commercially successful published LARP.^[30] The first German events were in about 1994, with fantasy LARP in particular growing quickly there, so that since 2001, two major German events have been run annually that have between 3000 and 7000 players each and attract players from around Europe.^[31]

Today, LARP is a widespread activity internationally. Games with thousands of participants are run by for-profit companies, and a small industry exists to sell costume, armour and foam weapons intended primarily for LARP.^[32]

Sundial Compass - Antique reproduction

A sundial is a device that tells the time of day by the position of the Sun. In common designs such as the horizontal sundial, the sun casts a shadow from its style onto a surface marked with lines indicating the hours of the day. The style is the time-telling edge of the gnomon, often a thin rod or a sharp, straight edge. As the sun moves across the sky, the shadow-edge aligns with different hour-lines. All sundials must be aligned with their styles parallel to the axis of the Earth's rotation to tell the correct time throughout the year. The style's angle from the horizontal will thus equal the sundial's geographical latitude. It is common for inexpensive mass-produced decorative sundials to have incorrect hour angles, which cannot be adjusted to tell correct time.

There are different types of sundials. Some sundials use a shadow or the edge of a shadow while others use a line or spot of light to indicate the time.

The shadow-casting object, known as a gnomon, may be a thin rod, or other object with a sharp tip or a straight edge. Sundials employ many types of gnomon. The gnomon may be fixed or moved according to the season. It may be oriented vertically, horizontally, aligned with the Earth's axis, or oriented in an altogether different direction determined by mathematics.^{[citation needed]}

With sundials using light to indicate time, a line of light may be formed by allowing the sun's rays through a thin slit or focusing them through a cylindrical lens. A spot of light may be formed by allowing the sun's rays to pass through a small hole or by reflecting them from a small circular mirror.^{[citation needed]}

Sundials also may use many types of surfaces to receive the light or shadow. Planes are the most common surface, but partial spheres,cylinders, cones and other shapes have been used for greater accuracy or beauty.^{[citation needed]}

Sundials differ in their portability and their need for orientation. The installation of many dials requires knowing the local latitude, the precise vertical direction (e.g., by a level or plumb-bob), and the direction to true North. Portable dials are self-aligning; for example, it may have two dials that operate on different principles, such as a horizontal and analemmatic dial, mounted together on one plate. In these designs, their times agree only when the plate is aligned properly.

Diving helmet - Maximus International - www.replicartz.com

Diving helmets are worn mainly by professional divers engaged in surface supplied diving, though many models can be adapted for use with scuba equipment.

The helmet seals the whole of the diver's head from the water, allows the diver to see clearly underwater, provides the diver with breathing gas, protects the diver's head when doing heavy or dangerous work, and usually provides voice communications with the surface (and possibly other divers). If a helmeted diver becomes unconscious but is still breathing, the helmet will remain in place and continue to deliver breathing gas until the diver can berescued. In contrast, the scuba regulator typically used by recreational divers must be held in the mouth, otherwise it can fall out of an unconscious diver's mouth and result in drowning^[2] (this does not apply to a full face mask which also continues to serve air if the diver is unconscious).

Before the invention of the demand regulator, all diving helmets used a free-flow design. Gas was delivered at a constant rate, regardless of the diver's breathing, and flowed out through an exhaust valve. Most modern helmets incorporate a demand valve so the helmet only delivers breathing gas when the diver inhales. Free-flow helmets use much larger quantities of gas than demand helmets, which can cause logistical difficulties and is very expensive when special breathing gases (such as heliox) are used. They also produce a constant noise inside the helmet, which can cause communication difficulties. Free-flow helmets are still preferred for hazardous materials diving, because their positive-pressure nature can prevent the ingress of hazardous material in case the integrity of the suit or helmet is compromised. They also remain relatively common in shallow-water air diving, where gas consumption is of little concern, and in nuclear diving because they must be disposed of after some period of use due to irradiation; free-flow helmets are significantly less expensive^{[citation needed]} to purchase and maintain than demand types.

Most modern helmet designs are sealed at the neck using a neoprene "neck dam" which is independent of the suit, allowing the diver his choice of suits depending on the dive conditions. When a neck dam is installed into a drysuit, however, the entire body is isolated from the surrounding liquid, giving an additional degree of warmth and protection. When divers must work in hazardous environments such as sewage or dangerous chemicals, a helmet (usually of the free-flow type or using a series exhaust valve system) is sealed to a special drysuit (commonly made of a fabric with a smooth vulcanised rubber outer surface) to completely isolate and protect the diver. This equipment is the modern equivalent of the historic Mark V "Standard Diving Dress".

We at Maximus International india manufacture replica of diving helmets and many other nautical reproductions. 

We at maximus international manufacturers  sextant of different types and techniques and here is a brief introduction of sextant below : 

A sextant is an instrument used to measure the angle between any two visible objects. Its primary use is to determine the angle between a celestial object and the horizon which is known as the object's altitude. Using this measurement is known as sighting the object, shooting the object, or taking a sight and it is an essential part of celestial navigation. The angle, andposition line on a nautical or aeronautical chart. Common uses of the sextant include sighting the sun at solar noon and sighting Polaris at night (in the Northern Hemisphere), to find one's latitude. Sighting the height of a landmark can give a measure of distance off and, held horizontally, a sextant can measure angles between objects for a position on a chart.^[1] A sextant can also be used to measure the lunar distance between the moon and another celestial object (e.g., star, planet) in order to determine Greenwich time which is important because it can then be used to determine the longitude.

the time when it was measured, can be used to calculate a

The scale of a sextant has a length of ⅙ of a turn (60°); hence the sextant's name (sextāns, -antis is the Latin word for "one sixth"). An octant is a similar device with a shorter scale (⅛ turn, or 45°), where as a quintant (⅕ turn, or 72°) and a quadrant (¼ turn, or 90°) have longer scales.

Sir Isaac Newton (1643–1727) invented the principle of the doubly reflecting navigation instrument (a reflecting quadrant—see Octant (instrument)), but never published it. Two men independently developed the octant around 1730: John Hadley (1682–1744), an English mathematician, and Thomas Godfrey (1704–1749), a glazier in Philadelphia. John Bird made the first sextant in 1757. The octant and later the sextant, replaced the Davis quadrantas the main instrument for navigation.

Maximus International manufacturer suppliers & exporters.

About Us

Maximus International Specialists in Nautical Accessories, the Quality of the designed aesthetic pieces we procure, and provide, enhance and rejuvenating the space they hold. Captivating and mood inspiring, your home or office will always have a eye catching work of art to impress even the most objective of visitors. We put many years of our importing and business experience to offer you a fascinating range of nautical items, gifts and decor, fine replicas of antique brass telescopes, compasses and sextants, precisely working clocks, spot & search lights, lamps, cargo lanterns,  armour helmets, greek armoury, roman armoury, medieval armoury, ancient armoury and more. These unique and attractive antiques bring a historical elegance to any room or space and is very fashionable. Items like nautical clocks, captain bells, etc. will make great desk or home decoration, and are excellent as gifts for like minded enthusiasts.

At Maximus International we leave no stone unturned to fill the needs of our clients. Our aim is to help both local and overseas customers do their antique browsing and shopping from the comfort of their own home. A user-friendly e-commerce interface, highly experienced manufacturing vendors and agile warehouse systems are just some of the features we have roped in for the convenience of our customers.We always strive to deliver best customer service such that you wouldn’t resist visiting us again sooner All our replica products are reasonably priced. We are passionate about our business and therefore passionate about helping you find that treasured antique that will compliment your home decoration or add to the discerning collectors unique range. Contact us to discuss any of our online products.

We can also develop any new product which is part of your dream and imagination provided you give us clues about it with the help of ideas, sketches or photographs. The products are manufactured with utmost care to infuse them with the best strength and appearance. The fantastic products are then packed in the most trendy and safest way so that our dear customers can use and cherish them for whole life. Apart from these, resolving the doubts and difficulties is also the parallel objective of our skilled workforce. We are a prominent company in the industry sector. Your dreams braid with our dreams!